Câu 1: Nơi sống và hình dạng của trai sống? Câu 2: Đặt điểm cấu tạo của vỏ trai? Câu 3: Mài mặt ngoài vỏ trai ngửi thấy có mùi khét, vì sao? Câu 4: Ngọc trai được tạo thành từ lớp nào của vỏ trai? Câu 5: Để mở vỏ trai quan sát bên trong cơ thể, phải làm thế nào? Tại sao trai chết thì vỏ mở? Câu 6: Đặc điểm cấu tạo cơ thể trai? Câu 7: Cơ thể trai cấu tạo gồm mấy phần? Kể tên các bộ phận trong từng phần? Câu 8: Trai tự vệ bằng cách nào? Vỏ trai có vai trò gì trong đời sống của trai? Câu 9: Nêu quá trình dinh dưỡng của trai sống? Câu 10: Cách dinh dưỡng của trai có ý nghĩa như thế nào với mô trường nước?

2 câu trả lời

Câu 1 : Nơi sống của trai : Sống trên mặt bùn ở đáy hồ ao, sông ngòi. 

 - Hình dạn của trai sống :

 Vỏ trai : Gồm 2 mảnh vỏ có hình đá vôi , che chở bên ngoài .

-Gồm 3 lớp vỏ :

+ Lớp sừng

+ Lớp đá vôi 

+ Lớp xà cừ 

Câu 2.  

- Cấu taok của trai :

    Cơ thể trai gồm :

+ Lớp ngoài : áo trai tạo thành khoang áo , có ống hút nước và ống thoát nước

+ Lớp giữa : tấm mang

+ Lớp trong : chân trai , chân rìu , lỗ miệng , tấm miệng 

Câu 3.  

- Vì phía ngoài của vỏ trai là lớp sừng có thành phần giống tổ chức sừng ở các loài động vật khác nên khi mài nóng cháy thì sẽ ngửi thấy mùi khét. 

Câu 4 : 

Ngọc trai đc hình thành ở lớp vỏ xà cừ .

Câu 5.  

- Để mở vỏ trai quan sát bên trong, phải luồn lưỡi dao vào qua khe vỏ cắt cơ khép vỏ trước và cơ khép vỏ sau ở trai. Khi đó vỏ trai sẽ mở. Khi trai chết 2 dây chằng không còn hoạt động nên 2 vỏ mở. 

Câu 6 :

- Chỗ bám cơ khép vỏ sau , ống thoát , ônga hút , mang , lỗ miệng , tấm miệng , áo trai .

Câu 7 :

Cơ thể trai gồm 3 phần :

+ Lớp ngoài : áo trai tạo thành khoang áo , có ống hút nước và ống thoát nước

+ Lớp giữa : tấm mang

+ Lớp trong : chân trai , chân rìu , lỗ miệng , tấm miệng 

Câu 8 :

Khi gặp nguy hiểm, trai co chân, khép vỏ để bảo vệ phần mềm bên trong.

Nhờ vỏ cứng rắn và 2 cơ khép vỏ vững chắc nên kẻ thù không thể bửa vỏ ra đế ăn phần mềm cơ thể trai.

Câu 9 :

 Hai mép vạt áo cơ thể trai tạm gắn với nhau tạo nên ống hút nước và ống thoát nước .

Câu 10 :

 Dinh dưỡng theo kiểu hút nước để lọc lấy vụn hữu cơ, động vật nguyên sinh và các động vật nhỏ khác trong nước. ... Vì vậytrai được ứng dụng để làm sạch nguồN nước . 

 

Trai sống ở biển Vỏ trai rất cứng
Câu hỏi trong lớp Xem thêm

MICROWAVING Microwaving is a method of cooking where food is bombarded by microwaves, usually within an appliance called a microwave oven which excite the water, fat and sugar molecules, thereby heating (cooking) both the outside and center of the food at the same time. (1)………………… (A common myth is that a microwave oven cooks from the center of the food outward. This appears to happen because heat generated at the surface escapes more readily from the surface of the food into the surrounding air.) One advantage of microwaving is that small amounts of food can be heated very quickly, making it useful for reheating leftovers. The disadvantage is that food which is microwaved does not undergo some of the chemical reactions, such as browning, which makes the food visually attractive. Primitive microwave ovens often do not cook evenly, leading to a concern that bacteria easily killed by more traditional cooking methods may survive the quick cooking time in "cold spots", though the food item as a whole is cooked to a safe average temperature. (2) …… Some high-end microwave ovens are combined with a convection oven which basically cook the food using microwave and hot air simultaneously to achieve both the fast cooking time and browning effect. (3) ………………… However microwave ovens are used in some fast food chains and special microwave bags are available for cooking fowl or large joints of meat. Professional chefs generally recommend using microwaves for a limited set of tasks, including: melting fats (such as butter) and chocolate, cooking grains like oatmeal and grits, cooking rice, thawing frozen meats and vegetables before cooking by other methods and quickly reheating already-cooked foods. Using a microwave to boil water is potentially dangerous, due to superheating. In a microwave, water can be raised quickly to a temperature above the boiling point before major bubbles form, especially if it is purified and in a very clean glass vessel. (4) ………………… This effect is rare, even for scientists who try to deliberately recreate it, and any seed whatsoever for boiling is likely to prevent the problem. Boiling water with, for instance, a teabag already in it will prevent any dangers by providing a seed, as will using a mug that is not perfectly clean. The risk greatly increases when water has already been boiled once in the same container. This situation can occur if the user of the oven boiled the water once, forgot about it, then came back later to boil it again. The first time the water boils, the seed bubbles (microscopic bubbles of air around which larger steam bubbles grow) are used up and largely eliminated from the water as it cools down. When the water is heated again, the lack of seed bubbles causes superheating, and a risk of a steam explosion when the water's surface is disturbed. Placing something in the water before heating can mostly alleviate this risk. If you are planning to mix something with the water, say tea or hot chocolate, adding it before heating will insure that the water boils. Otherwise, placing a wood object, for instance a chopstick, in the water before heating will also work. Care should be taken when removing heated water from a microwave. Make sure that the hands are protected from possible liquid boil-over, place the container on a level, heat-proof surface and stir liquid with a warm spoon. Also, never add powdered substances (such as instant coffee or cocoa mix) to the container taken from the microwave, due to the addition of all those seed bubbles and the potential for violent, spontaneous boiling. (5) ………………… Metal objects, such as metal utensils, in a microwave oven can lead to dangerous situations. Metals do not absorb microwaves effectively. Instead, metals reflect microwaves, thereby preventing the latter from reaching the food. (6) ………………… Thin metal layers, such as metal foil and mugs with metal trim can melt or burn due to the strong electrical currents that are generated in metal objects. However, small solid metal objects, such as spoons, in combination with a large amount of absorbing food or liquid, normally do not lead to problems. This article is licensed under the GNU Free Documentation License. It uses material from the Original Wikipedia article.

6 lượt xem
1 đáp án
20 giờ trước